Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is a cutting-edge anti-theft system that utilizes advanced technology to stop car theft. This discreet device is unnoticeable by thieves, and it only starts the engine after a PIN or app is entered.
It connects to the CAN data network of your vehicle and is weatherproof. It features a service/valet function that lets you temporarily start your vehicle while it is in the garage.
Easy to install
The Ghost immobiliser shields your car from key theft, cloning and hacking. It uses a PIN code system that is integrated into the car's electronic control unit, making it hard for thieves to recognize. Unlike traditional immobilisers, it doesn't require specific keys or sensors. It is completely hidden with no LEDs or signals to signal its presence. It's also less expensive than replacing an ECU or installing an entirely new key fob. It also can reduce the cost of your monthly insurance.
Follow the instructions of the manufacturer when installing follow the manufacturer's instructions when installing a Ghost 2 vehicle immobiliser. This will ensure that the device works correctly and effectively. Once the installation is complete check the system by entering the PIN code, then turning on the engine. Regular testing will help you identify any problems before they get worse.
Check the location of the CAN H and L wires prior to starting the installation. They are essential for powering the immobiliser so it is vital that they are connected properly. Labelling the wires will aid in locating them when installing. Once you have located the wires, connect them to a 12V power source and an earthing source. Use a fuse tap to shield the connections from damage or short-circuits.
After connecting the wires, tidy the wires with cable ties to prevent potential interference. You can also cover the connections with insulation tape or heat-shrink tubing. This will protect them from electrical shorts and increase the lifespan of the device. It's a good idea to test your Ghost 2 immobiliser once the wiring is secured.
The Ghost 2 immobiliser offers a service mode for situations where you may need to sell your vehicle like when it is being repaired or valet-parked. This disables the PIN sequence temporarily. To activate this feature, simply press the brake pedal while holding down the accelerator for a number of times that is equal to the first number of the emergency code. The system will enter service mode. This can be confirmed by flashing five times the indicator signal.
It is simple to change PIN codes
A ghost 2 immobiliser is an excellent way to safeguard your vehicle from theft. It is hidden inside the vehicle and is accessible only with a code. The device communicates with the vehicle ECU using its data bus and does not rely on radio frequency signals, as aftermarket alarm systems or traditional Thatcham immobilisers do. This makes it difficult for thieves to listen for the click of an immobiliser relay, or to add new key fobs. The control unit is concealed within the wiring of the vehicle's dashboard, and isn't physically altered to reset the system.
The ghost 2 immobiliser is connected to the vehicle's CAN Data network. It makes use of buttons on the door panels, steering wheel and centre console, to create a customisable series of up to twenty button presses that need to be entered to start the engine - just as a PIN. This unique system can be reprogrammed and doesn't require cutting wires during installation. You can even put your vehicle in Service or Valet mode to allow it to be started temporarily while you are giving it to a mechanic for work.
The app can also be used to block your PIN code in the event that you've lost your keys or change it. This feature is particularly helpful when you've given your car away to someone else to use for valet service or parking. It stops them from starting the car and driving it off without your consent. It's also unnoticeable by professional thieves since it doesn't use radio frequencies or circuit cuts.
The ability of the immobiliser to stop relay thefts is a excellent feature. Relay theft is among the most frequent methods of car theft. Criminals can hack your car's diagnostic ports, and then alter the signal transmitted by the car's ECU to trick it into believing that an authentic car key is present. This is the way traditional immobilisers are bypassed, however, with an immobiliser that is ghost 2, the signal is blocked before it can reach the ECU.
Easy to use app
Ghost 2 is an immobiliser that is revolutionary. It protects your vehicle from key-cloning. It connects to the CAN data network of your vehicle and requires the use of a PIN number to start the engine. It also stops thieves from using signal spoofing or device spoofing, which are both common tactics used to steal vehicles.
The system is simple to use and functions as a normal car alarm. The installation of the system allows you to create a unique 20-digit PIN code that you must enter prior to starting the vehicle. This will stop your vehicle from being stolen even when you lose your keys. If you wish to disable the system, you can do so via an app on your smartphone.
ghost 2 immobiliser cost is completely silent, and it does not emit radio frequency signals. It is a weatherproof and discreet device that can be installed anywhere inside your vehicle. It can be hidden under the dashboard, steering wheel, or even the door panels. It communicates via the CAN data loop to your ECU and is not affected by the diagnostic tools used by thieves to locate security systems. It is also not affected by jamming devices which spoof codes.
It is a covert system that can be used to stop theft from all vehicles. Its technology has been proven efficient, and it's in compliance with TASSA Standards. The Ghost is a great option for classic, sports, and prestige cars. It can also be used as method to safeguard vehicles rented on apps like Turo.
The Autowatch Ghost 2 represents the next generation of vehicle immobilisers. The system is completely inaccessible to thieves, and blocks the vehicle from starting without your PIN or unless they have been authorized by the app. It also doesn't emit any radio frequencies or other signals that could be detected by scanners. The installation process is simple and quick. The app is user-friendly with a simple interface and a simple navigation. It also has a GPS tracker that will help police locate the vehicle and then recover it.
Simple to reset
It is possible to protect your vehicle from theft by using a ghost 2 immobiliser. It integrates with your vehicle's ECU to create a barrier that thieves are unable to penetrate without the correct PIN. The device is also TASSA certified which means it's recognized by insurance companies. It's an effective device to prevent car theft and can save you a lot of dollars in the long run.
The Ghost system, unlike traditional alarm/immobilisers which require circuit cutting it is directly connected to your vehicle's CAN data network. It works by using the buttons on your dashboard and steering wheel. You can create a unique PIN that is up 20 presses in length. This PIN is required to be entered before the engine can start like a credit card PIN. The Ghost system is completely inaccessible to thieves and there aren't lights to indicate its presence. This makes it the most efficient aftermarket CAN-bus immobiliser on the market today.
Another benefit of the Ghost system is that it does not make use of radio frequency signals, which means it cannot be detected or scanned by thieves. This prevents key attacks that are cloned and relay attacks as and the typical method of hacking into a car's computer system using its CAN bus scanning for signals. In addition, the Ghost system is designed to be completely hidden inside the vehicle, and there are no lights or signals that indicate its presence.
The system also comes with an option for a Transport Mode that disables the Ghost system which is useful in situations when you need to temporarily disable it, like when you are traveling or performing maintenance. However this mode isn't as effective as Service Mode, as it does not deactivate the system if your vehicle is traveling over 31 mph for more than 15 minutes.
You'll require the emergency code provided by your installer to reset your Ghost 2 immobiliser. It is typically hidden under an area for scratch-offs on the card that was provided when you installed the device. It is important to keep this emergency code safe and store it in a location that is secure, such as your wallet at home.